The eccentric plug rotary control valve features an eccentrically mounted plug or ball, which combines rotary valve efficiency with globe valve ruggedness. The Fisher® V500 is designed for severe and/or erosive service and features sealed bearings, an oversized one piece valve shaft and a variety of replaceable wear resistant trims ranging from SST to Ceramic. The Fisher CV500 features the same ruggedness of the V500 but uses a segmented ball as the control member rather than a plug. The CV500 has higher capacity than the V500 and features an equal percentage characteristic for better control performance. Both of the valves feature a splined valve shaft, which provides zero lost motion when coupled to a Fisher rotary actuator
Fisher® CV500 is a flanged or flangeless eccentric plug valve with reversible metal seat ring and splined shaft. The CV500 is available in NPS 3 through 12 (DN 80 through 300) , CL150/300/600 (PN 10 through PN 100). The camming of the segmented ball permits high capacity flow, and the valve body (being similar to the V500) gives it rugged strength.
Fisher® V500 is a flanged or flangeless eccentric plug valve with reversible metal or ceramic seat ring and splined shaft. The V500 is available in NPS 1 through 8 (flangeless available only in NPS 3 through 8), CL150/300/600 (PN 10/100) (NPS 3 through 8), CL300 (PN25/40). This valve is for use in heavy slurry or corrosive applications.
Fisher® High Performance Butterfly Valves feature an eccentrically mounted disc and are known for their wide application range and shutoff capability. They are available for a variety of control and isolation service from cryogenic to high temp and pressure classes to ASME CL2500 and sizes from NPS 2 to 72.
POSI-SEAL™ High Performance Butterfly Valves are designed for isolation on/off service as well as low tier control. The POSI-SEAL valves feature keyed, double D or square valve shafts. The POSI-SEAL valves are available in sizes NPS 2 to 72, pressure classes up to CL2500. Shutoff is provided by a variety of seals which include metal, PTFE and fire-tested and cryogenic.
Fisher® 8510 is a wafer valve, with a splined shaft for throttling control. The 8510 is available in NPS 14 through 24, CL150 (PN 10 and PN 16 compatible). These valves feature an eccentrically mounted disk and a PTFE or 316 stainless steel seal ring.
Fisher® 8532 is a high-performance butterfly valve with a splined shaft for throttling control. This valve is available in NPS 14 through 24, CL150 and CL300. With a wafer or lugged body and wide variety of seals, it can be used in most industry applications.
Fisher® 8560 is a high-performance butterfly valve with a splined shaft for throttling control. The 8560 is available in NPS 2 through 12, CL150 and CL300. With a flangeless (wafer) or single flange body and wide variety of seals, it can be used in most industry applications. The NPS 2 valve is multi-rated to CL150/300/600.
Fisher® 8580 rotary valve offers excellent throttling performance. An approximately linear flow characteristic provides precise throttling control. The 8580 valve offers high cycle life and rugged reliability.
Fisher® V260 is a flanged full ball valve in NPS 8 through 16 and compatible with CL300 or 600 for high capacity process applications. The V260 can be ordered with Aerodome or Hydrodome attenuators for noise reduction.
Fisher® V250 is a flangeless, reduced bore ball valve in NPS 4 through NPS 24 and compatible with CL600 or CL900 for heavy duty (high temp or tight shutoff) throttling or on/off applications.
Sanitary valves are designed to meet the stringent demands of today’s state-of-the-art Life Science facilities. Polished, stainless steel body and trim components ensure efficient cleaning and sanitizing giving you confidence that your processing environment produces the highest purity.
Baumann 85000 sanitary pinch valves are intended for use with up to 3/4 inch O.D. pharmaceutical grade tubing. They are designed to couple FIELDVUE™ digital valve controller intelligence with a linear actuator and tube shell.
The 85000 is designed for use in both biotechnology and pharmaceutical industries, where cleanliness and sterility are required. The primary use is for disposable skid-based processes, replacing traditional manually operated valves. Automated valves offer consistent quality, better record keeping, and improved batch control.
Baumann™ 89000 sanitary control valve with high lift metal plug suitable for the Life Science and Food & Beverage Industries
Straight-pattern (globe), angle-pattern, and three-way valves offer a broad range of types, sizes, and materials--from DN15 to 600 (NPS 1/2 to 24) low-flow valves to DN 500 (NPS 20) and larger for demanding high-pressure steam and hydrocarbon service.
General and chemical service applications include general, utility, and corrosive services. Many valves can be used for more than one type of service, depending on the actual temperatures, pressures, process fluids, and other conditions. More specific descriptions for each valve are presented below.
High-pressure valves are extremely rugged, single-port, globe and angle valves for applications in power, refining, hydrocarbon, chemical, and other industries.It includes Fisher® D & DA,Fisher® D2 FloPro,Fisher® D3 FloPro,Fisher® HP & EH.